Electrical Panel
Panel Safety Tips
As electricians, Thompson Electric emphasizes a safety first approach to all work we do. Below are some basic electrical safety tips everybody should know regardless of whether you are a property owner, are considering buying or renting a place, or are a currently a tenant.
Understanding how an electrical panel is supposed to work?
Zinsco panels may have significant design flaws.
The design flaws identified in Zinsco panels include:
Damage created by a malfunctioning Zinsco panel is not observable on superficial inspection
Even after the cover of a Zinsco panel is removed, everything can appear fine and seem to be operating, but what isn’t visible from the front can cause serious issues. Upon exploring the components within a Zinsco electrical box, electricians sometimes find that breakers have melted to the bus bars and, therefore, cannot be removed. This is because an overload of current is being drawn due to the increase in today’s electrical demands. In that condition, a breaker would not be able to trip and possibly allow an unsafe amount of electricity into the home. This could lead to a potential fire or increase the risk of an electrical shock.
Most Zinsco panels that are still in use are more than 40 years old. As time has passed, electricians and home inspectors have found that Zinsco panels can work fine for many years, but as electrical demands have increased, these panels can overheat, melt, and arc. When this occurs, it causes the components inside of breakers to burn out, preventing the breaker from tripping and leading to a significant fire hazard.
A licensed electrician should be the only person removing breakers from a Zinsco Panel. Due to their qualifications, they’ll be able to determine if the breakers have melted to the bus bars. Because breakers can appear to be off when they’re actually still conducting electricity, serious electrical shock risks are present.
Understanding how an electrical panel is supposed to work?
- An electrical panel includes bus bars, which conduct a major current of electricity from incoming feeders.
- Circuit breakers connect to bus bars and safely distribute electricity throughout the building.
- Each circuit breaker protects the electric current flowing to a specific appliance or outlet.
- The circuit breaker will trip (shut off) the flow of electricity if it senses the current is overloaded or short-circuited.
- When a circuit breaker trips, it prevents the wiring from overheating and starting an electrical fire.
Zinsco panels may have significant design flaws.
The design flaws identified in Zinsco panels include:
- Certain components in the panel contain aluminum wiring. This presents an issue because aluminum wiring rusts, which can decrease the effectiveness of the electrical conductor. Additionally, aluminum wiring can lead to overheating and interfere with electricity flow.
- The bus bars are damaged and destroy easily.
- The design of the Zinsco electrical panel allows breakers to slide up and down the bus bars if a breaker is absent. This leads to additional safety issues.
- Breakers’ interior tripping mechanisms sometimes get jammed. This will indicate that the breaker is off when, in reality, the breaker is still on. Therefore, the breaker isn’t providing any overload protection. This can lead to the panel overheating and starting a fire.
Damage created by a malfunctioning Zinsco panel is not observable on superficial inspection
Even after the cover of a Zinsco panel is removed, everything can appear fine and seem to be operating, but what isn’t visible from the front can cause serious issues. Upon exploring the components within a Zinsco electrical box, electricians sometimes find that breakers have melted to the bus bars and, therefore, cannot be removed. This is because an overload of current is being drawn due to the increase in today’s electrical demands. In that condition, a breaker would not be able to trip and possibly allow an unsafe amount of electricity into the home. This could lead to a potential fire or increase the risk of an electrical shock.
Most Zinsco panels that are still in use are more than 40 years old. As time has passed, electricians and home inspectors have found that Zinsco panels can work fine for many years, but as electrical demands have increased, these panels can overheat, melt, and arc. When this occurs, it causes the components inside of breakers to burn out, preventing the breaker from tripping and leading to a significant fire hazard.
A licensed electrician should be the only person removing breakers from a Zinsco Panel. Due to their qualifications, they’ll be able to determine if the breakers have melted to the bus bars. Because breakers can appear to be off when they’re actually still conducting electricity, serious electrical shock risks are present.
Call Thompson Electric Today